by The normal air that you usually fill up in your vehicle tyres contains about 78 percent nitrogen, 21 percent oxygen and the rest 1 percent as other gases. So, can you make a difference if you fill-up the entire tyre with 100 percent nitrogen? Well, that’s what we’re going to discuss in this extensive guide.
When you compare tyres filled with normal air versus only nitrogen, the following two things that you should be considering:
- Nitrogen only contains 7% air, which means that the moisture content in a nitrogen tyre will be much less than a tyre filled with normal air.
- In nitrogen tyres, the presence of oxygen will be replaced by nitrogen. Hence, the difference is more like oxygen vs nitrogen tyres.
How Using Nitrogen Instead Of Normal Air Can Make A Difference?
According to a reliable service provider for wheel alignment in Auckland, when you use normal air in your vehicle tyres, certain reactions inside the tyre tend to happen. Since friction takes place between the tyre and the road, which in turn increases the temperature of the tyres. When the temperature increases, the moisture present in the air inside of the tyre expands at a faster rate.
Moreover, the small oxygen atoms start leaking out of the tyre, making the tyre pressure change. And when the pressure decreases, the tyres fail to maintain the weight of the vehicle, ultimately leading to tyre bursts or leaks.
However, if you utilise nitrogen instead of normal air, you can easily prevent the above-mentioned issues and thereby ride safer on the road with your vehicle.
The Advantages Of Using Nitrogen Instead Of Normal Air For Vehicle Tyres
- In case you’re unaware then you must know that nitrogen doesn’t migrate through rubber tyres as fast as oxygen. This means that you can expect your tyre pressure to remain stable over time. So, you don’t have to worry about your tyre pressure much and thereby only focus on driving your vehicle. Constant tyre pressure will help you in saving fuel as well as tyre maintenance costs.
- Since nitrogen is an inert gas, it will not contain any other gas particles. On the other hand, normal gas will contain oxygen and water molecules, leading to the corrosion of the aluminium or steel tyre rims. However, nitrogen is corrosion-free and will be able to maintain the same tyre pressure even with any temperature change.
Thus, even though nitrogen isn’t available widely and is expensive, most tyre experts recommend using nitrogen for vehicle tyres.
If you want to know more about using nitrogen inside vehicle tyres, feel free to contact us at any time.
